Contents: Checking the key presence sensor in…↓ Checking the door limit switch ↓ Checking the central control unit ↓
Checking the key presence sensor in the ignition switch
Cm. "Central lock".
Checking the door limit switch
Cm. "Central lock".
Checking the central control unit
1. Connect the battery to terminal "41" of the control unit to terminal "50".
[The original article is on the portal toyotaman.ru]
2. After this, connect "-" also to terminals "45" and "46", check that the buzzer works.
3. Disconnect the wire from terminal "46", check that the buzzer turns off.
4. Under the conditions of point 2, disconnect the wire from terminal "46", check that the buzzer turns off.
5. Under the conditions of point 2, connect to terminal "47", check that the buzzer turns off.