2. Disconnect the electrical connectors from the rear door. Using a marker, mark the position of the rear door hinge mounting bolts.
3. While supporting the rear door, remove the door support pillars.
4. Unscrew the rear door hinge mounting bolts and remove the rear door.
5. Installation is performed in the reverse order of removal. After installing the rear door, check that the gap between the rear door and the car body elements is the same everywhere in the closed position. If necessary, adjust the position of the rear door by loosening the hinge mounting bolts and, moving the door within the elongated installation holes, find the required position.
6. Check that the rear door lock is aligned correctly with the lock striker plate. If necessary, loosen the bolts and adjust the striker plate position.
The full article is posted on the website: TOYOTAMAN