Lock, lock cylinder and door opening handles [Toyota Camry XV10]

1. Remove the door trim and protective film from the door.

Door lock

Door lock fastening elements

1. Through the holes in the door, disconnect the rods of the outer door opening handle and the lock cylinder from the lock and unscrew the lock mounting screws.

2. Remove the door lock from the door.

3. Installation is carried out in the reverse order of removal.

Lock cylinder and outside handle

1. Disconnect the rods from the lock cylinder and the outer handle.



2. Unscrew the two bolts and remove the outer door opening handle.



3. Remove the screw and remove the lock cylinder from the outside door handle.



4. Installation is carried out in the reverse order of removal.

Inner handle

(The material is republished from an online website: «www.ToyotaMan.ru»)

1. Unscrew the bolts securing the inner door opening handle.

2. Remove the handle and disconnect the rods from it.

3. Installation is carried out in the reverse order of removal.