Possible direction of movement for adjusting the position of the trunk lid
1. Open the trunk lid.
2. Remove the plastic screws, take out the clips and remove the trunk trim.
3. Disconnect the electrical connectors from the trunk.
The information was taken from a web portal ToyotaMAN
4. Using a marker, mark the position of the trunk hinge mounting bolts.
5. Unscrew the bolts and remove the trunk from the hinges.
6. Installation is performed in the reverse order of removal. After installing the trunk lid, check that the gap between the trunk lid and the car body elements is the same everywhere in the closed position. If necessary, adjust the position of the trunk lid by loosening the mounting bolts and moving the lid within the elongated installation holes to find the required position (see fig. Possible direction of movement for adjusting the position of the trunk lid).