Temperature regulator
The temperature switch changes the temperature of the air entering the passenger compartment.
Turning the switch to the HIGH side increases the temperature, and turning it to the LOW side decreases the temperature.
Air circulation regulator
The air circulation regulator must be used to supply fresh air or to recirculate the air inside the car.
At the position of the regulator «OUTSIDE AIR» fresh air enters the cabin from outside.
To ensure air recirculation, it is necessary to set the regulator to the position «RECIRCULATED AIR».
In the middle position of the regulator, mixed air enters the passenger compartment.
Fan switch
The fan switch is used to turn on the fan and change its speed.
The air supply is determined by the speed of the blower fan. Therefore, you should also turn on the fan while driving.
Climate control
The climate control switch turns on the air conditioning system.
If the light on the climate control button flashes, you must contact a TOYOTA service station, as there is a malfunction in the system. In this case, the climate control switches off automatically.
Heating
1. Set the temperature control to any position other than «LOW». For uniform air distribution throughout the passenger compartment, install the air distribution switch in the center.
2. Set the air circulation knob to the position «OUTSIDE AIR». If you need a quick circulation of warm air, set the knob to «RECIRCULATED AIR» or «BLEND».
3. Set the air circulation knob to position «FLO OR». If you need a quick circulation of warm air at face level, set the knob to «BI-LEVEL».
Set the fan switch to any position other than «OFF».
4. If a dry air supply is required, press the climate control button.
Cooling
1. Set the temperature control to any position between the middle position and the «LOW».
If you need to supply warm air on two levels, set the regulator to the middle position.
2. Set the air circulation knob to the position «OUTSIDE AIR».
If you need fast circulation of cold air, set the knob to «RECIRCULATED AIR» or «BLEND».
3. Set the air circulation knob to position «FACE».
If you need a quick circulation of warm air at face level, set the knob to «BI-LEVEL».
4. Set the fan switch to any position other than «OFF».
5. Turn on climate control button «OFF».
Ventilation
1. Set the temperature control to the position «LOW».
2. Set the air circulation knob to the position «OUTSIDE AIR».
3. Set the air circulation knob to position «FACE».
4. Set the fan switch knob to any position other than «OFF».
5. Turn on climate control button «OFF».
Removing condensation from the front glass
1. Set the temperature control to any position.
2. Set the air circulation knob to the position «OUTSIDE AIR».
3. Set the air circulation knob to position «WINDSHIELD».
4. Set the fan switch knob to any position other than «OFF».
5. Turn on climate control button «OFF».
Air flow distribution
Position «FACE» - directs air flow into the cabin at face level.
Position «BI-LEVEL» - directs air flow into the cabin at face level and to the legs.
Position «FLOOR» - directs more air flow into the cabin at the feet and partially at the level of the face.
Position «WINDSHIELD» - directs the air flow mainly to the front glass, the front of the side windows and the face.