Contents: Removal ↓ Installation ↓
Compressor (4-cylinder models)
A – wire connector
B – mounting bolts
C – refrigerant pipes
Compressor (6-cylinder models) - the generator has been removed
A - wire connectors
B – mounting bolts
C – refrigerant pipes
Removal
1. Release the pressure in the system.
2. Disconnect the negative battery cable.
3. Remove the compressor drive belt. On six-cylinder models, remove the alternator.
4. Disconnect the refrigerant pipes and wires from the compressor.
5. Remove the bolts and remove the compressor.
Installation
Installation is carried out in the reverse order of removal.