Establish a basic and lock bolt of fastening of the generator, bait them, but do not twist completely.
Pic. 7.10. Generator installation (models with engine 1 and 2 AZ-FE)
Connect the generator connector and secure the wiring (pic. 7.10).
Attention! Do not connect the alternator connector until the alternator is installed.
Install the drive belt.
Tighten the generator mounting and retaining bolts.
Tighten the wire harness clamp bolts and the alternator wire bolt.
Torque:
- support bolt M10 - 52 Nm;
- locking bolt M8 - 21 Nm;
- wiring harness clamp bolt - 8.4 N·m;
- generator wire bolt - 9.8 Nm.