Depress the brake pedal and check that the engine can only be started when the shift lever is in the N or P position.
Check that the reverse light comes on and the reverse warning buzzer sounds only when the shift lever is in R.
If there is a problem, check the park/neutral position switch circuit for continuity.
Park/Neutral Switch Adjustment
Loosen the 2 parking/neutral switch mounting bolts and place the shift lever in the N position.
Pic. 3.77. Park/Neutral Position Switch Adjustment Diagram
Align the notch with the neutral baseline (pic. 3.77).
While holding the switch in place, tighten the 2 bolts.
Tightening torque: 5.4 Nm.
After adjustment, carry out the check described at the beginning.