Removing
Rear suspension hub parts
1 - hub; 2 - hub bolt; 3 - bearing; 4 - nut; 5 – a nave of a back suspension bracket in gathering; 6 – O-ring; 7 - support; 8 - brake disc; 9 - brake drum
1. Raise the rear of the car and secure it on stands. Remove the wheel.
2. On models with rear disc brakes, remove the brake caliper. Remove the brake drum or brake disc from the hub.
3. Unscrew the 4 bolts securing the hub axle to the hub fastener. At the same time, rotate the hub flange so that the holes in the flange are installed opposite the mounting bolts.
4. Remove the rear suspension hub.
5. Remove the O-ring from the base of the hub axle.
6. Unscrew the hub fastening nut, remove the hub from the bearing and, if necessary, replace the bearings. Install the hub in the bearings and tighten the fastening nut to the required torque.
Installation
Installation is made in sequence, return to removal.