Attention! Work should be done by two people.
Removing
1. Open the trunk lid and cover adjacent body panels.
2. Remove the inner lining of the cover and disconnect from the cover the wiring connectors for trunk lighting, rear lights and pull out the lock drive cable (see subsection 11.14.). Pre-attach a piece of wire of sufficient length to the cable.
3. Outline the hinges of the lid.
4. Loosen the screws securing the cover to the hinges and remove the cover.
Installation
Installation is carried out in the reverse order. When installing, align the hinges with the contours applied during removal.
Adjustment
1. Adjusting the position of the trunk lid horizontally is provided by moving the lid in the holes for the hinge bolts after loosening them.
2. Lid height (and alignment of the cover with the surface of adjacent body panels) adjustable by moving the lid lock latch with the bolts released (arrows). Pre-outline the contours of the latch.