Contents: Removal ↓ Installation ↓
Removal
1. On vehicles with manual window lift, remove the window lift handle by removing the clip with a cloth.
2. Remove the lock release button.
 |  |
3. On vehicles with electric windows, pry up and remove the switch plate underneath which is one of the panel mounting bolts (arrow).
4. Pry and remove the outer mirror cover.
5. Pry up and remove the plug, unscrew the screw.
6. At the front of the door, remove the plastic plugs (A) and unscrew the screws (B).
7. Pry up and remove the plug, unscrew the screw at the back of the door.
8. Carefully pry the panel off the latches.
9. Lift the panel up, disconnect the connectors and remove the panel.
10. To access the window regulator or the outside door handle, lift the window, remove the window regulator control unit (on car parts), trim panel bracket and speaker (see subsection 12.1.14.).
11. Then carefully remove the water shield.
Installation
Installation is carried out in reverse order. First, make sure that all the latches are present in the door trim. Connect all the connectors before installing the panel in place.