Warning! Some vehicles are equipped with seat belts with a pyrotechnic pre-tensioning system that is triggered in an accident. It is prohibited to remove the seat belts or disconnect any connectors near the belts on these vehicles. A malfunction of this system is indicated by the airbag hazard lamp lighting up. In this case, the vehicle should be immediately taken to a service station.
On vehicles with side airbags, deactivate the safety module before removing the seats (see subsection 12.1.26.).
1. Remove the pads and unscrew the seat mounting bolts.
2. Loosen the seat mounting bolts (total 3 of 4 bolts indicated).
3. Fold the seat forward, disconnect the connectors and remove the seat.
4. Installation is carried out in reverse order.