Removing
1. Disconnect the negative battery cable.
2. Release the pressure in the fuel system.
3. On six-cylinder engines, remove two bolts (indicated by arrows in the figure on the left) and move the vacuum valve control coil assembly to the side.
4. Disconnect the wires from the injectors.
5. Disconnect the fuel supply pipes from the fuel line.
6. Loosen the fuel line bolts (indicated by arrows). In the picture on the left - 4-cylinder engines, on the right - 6-cylinder.
7. Remove a fuel highway together with injectors.
8. Remove the injectors from the fuel line sockets.
9. If you are going to reuse the injector, replace its o-rings.
Installation
Installation is carried out in the reverse order of removal.