The fuel supply and return pipes run from the fuel tank to the engine compartment and are clipped to the underbody. Check tubing for damage.
Steel tubes
Use only steel pipes to replace fuel system pipes.
If you loosen tubing connections, observe the following rules:
- try not to bend or crush the tubes;
- replace tube seals.
Flexible hoses
Hose and metal tube connection
1. Hose; 2. Clamp; 3. Tube
Quick connector
Attention! Flexible hoses should not be close to the elements of the exhaust system.
1. Release the pressure in the system.
2. Remove the clamps holding the tubes to the body.
3. In places where rubber hoses are connected to metal pipes, spring clamps are usually used. In order to remove such a clamp, it must be squeezed with pliers and moved up. Sometimes quick-release clamps are used in the connections.
4. Remove the fuel hose clamp 1.
5. Press on the eyelet and disconnect the hose.
6. Installation is carried out in the reverse order of removal.