Loosen the air conditioner hose bracket mounting bolt.
Fig. 6.74. Disconnecting the tubes from the pressure modulator
Using a special tool, unscrew the 6 mounting nuts and disconnect the brake pipes from the pressure modulator (Fig. 6.74).
Disconnect the two connectors.
Fig. 6.75. Removing the pressure modulator
Unscrew two bolts and two nuts and remove the modulator assembly (Fig. 6.75).
Unscrew the two nuts and disconnect the modulator from the bracket.
Remove two holders and three bushings from the modulator.
Installation is carried out in the reverse order of removal.
After installation, fill the reservoir with brake fluid, bleed the brake system and check for leaks.
The test is carried out using a special diagnostic tester DLC3.
View the original source on the website ToyotaMAN