Contents: Removal ↓ Assembly ↓
Removal
1. Remove the starter.
2. Mark the position of the traction relay on the starter by placing a mark on it.
3. Disconnect the starter bus. To disconnect the bus, unscrew the nut.
4. Loosen the starter gearbox mounting screws.
5. Loosen the starter mounting bolts to the gearbox.
6. Disconnect the electric motor from the gearbox and traction relay.
7. Then remove the traction relay from the gearbox. When assembling the relay with the gearbox, first install the spring shown in the picture.
Assembly
Assembly is carried out in reverse order.