Clutch interlock switch
The switch is mounted behind the pedal.
Check and adjustment
1. Make sure the engine only starts when the clutch pedal is pressed all the way down (check the pedal adjustment beforehand, see subsection 2.23.).
2. Disconnect the switch connector and check the closure of the switch contacts when pressing on its rod. When the stem is released, the contacts should open.
3. If the switch needs to be replaced, unscrew the locknut and turn the switch out.
4. When installing the switch, adjust it by depressing the clutch pedal and, turning the switch, set the distance to 5.0 (± 0,5) mm.