Pic. 2.211. Diagram of the ETCS-i system: 1 - throttle valve; 2 - throttle position sensor; 3 – sensor of position of a pedal of management of giving of fuel; 4 - throttle actuator motor; 5 - air flow sensor; 6 - electronic b
In a conventional throttle valve, the throttle opening is uniquely determined by the force on the fuel control pedal. On the contrary, in the ETCS-i system (pic. 2.211) The ECM calculates the optimum throttle opening angle that suits the driving conditions and uses the throttle motor to control the opening. The throttle cable and lever have been removed, and the position sensor has been installed on the throttle control pedal.
Principle of operation
The ECM drives the throttle motor by setting the target throttle opening angle in accordance with the driving mode of the vehicle.
Idling engine speed control
The engine control unit maintains the engine speed at idle at a certain level.
Gearshift shock protection
During gear changes, throttle control is synchronized with the operation of the ECT system (Electronic transmission), to reduce shock loads.
Automatic speed control system
The electronic engine control unit with integrated cruise control electronic control unit directly actuates the throttle valve for cruise control.