Note: Installation is performed in the reverse order of removal.
1. Remove the right engine cover.
2. Disconnect the negative battery terminal.
3. Remove the starter assembly.
a) Disconnect terminal "B" and the starter connector.
- Tightening torque - 9 Nm
b) Unscrew the two starter mounting bolts.
- Tightening torque - 45 Nm
4. Remove the coolant temperature sensor.
a) Disconnect the sensor connector.
b) Using a 19 key, unscrew the sensor.
- Tightening torque - 35 Nm
(This material is taken from a resource www.ToyotaMAN.ru)
