2. Avoid prolonged engine operation at high speeds and sudden acceleration when the engine is not warmed up.
3. If the turbocharger fails prematurely, check:
- Engine oil level and quality.
- Turbocharger operating conditions.
- Pipelines supplying oil to the turbocharger.
4. Take care when removing and installing the turbocharger. Do not carry the unit by the bypass valve drive rod.
5. After removing the turbocharger, close the inlet and outlet pipes and oil holes with plastic plugs.
6. Before installing the turbocharger, flush the oil supply pipe.
7. Before installation, clean the mating surfaces of the turbocharger and oil pipes.
This material is taken from a resource Toyotaman.ru
8. When replacing fasteners, install only original products.
9. After installing the compressor, pour 20 cm of motor oil into the bearing housing and turn the compressor shaft by hand.
10. After replacing the compressor, crank the engine with the starter for 20-30 seconds (without starting the engine) to fill the lubrication system or run the engine at idle speed for at least one minute.
11. Do not operate the engine with the air filter removed. Otherwise, the compressor wheel will fail very quickly.
