Headlights on
To turn on the headlights, turn the knob at the end of the lever. The first position - side lights are turned on. Second position - side lights and headlights turn on.
When the engine is turned off with the headlights on and the doors are opened, the buzzer will sound.
Near and far light
Lever forward = high beam.
Lever towards you = dipped beam.
If you pull the lever towards you as far as it will go, the light signal turns on.
Direction indicators
Lever to fixed position:
up = right turns enabled,
down = left turns enabled.
When the steering wheel is returned to its original position, the direction indicator lever automatically returns to its original position.
When changing lanes, press the lever only until you feel resistance. When released, the lever returns to its original position.
If the turn signal lamp on the instrument cluster flashes faster, one of the turn signal lamps is burned out.
Headlight beam leveler
With the help of the adjusting mechanism, you can smoothly adjust the angle of the headlights in accordance with the load of the car. This reduces the risk of dazzling oncoming drivers. At the same time, due to the correct installation of the headlights, the driver is provided with better visibility conditions.
To lower the light cone downwards, turn the dial upwards from the initial position.
Positions of the corrector depending on the vehicle load
Driver only | 0 |
Driver and front passenger | 0 |
Maximum load of the cabin, including the driver | 2 |
Maximum loading of interior and trunk | 2 |
Driver and maximum luggage load | 4 |
Alarm
The alarm system also functions when the ignition is off.
When the alarm is on, all direction indicators flash simultaneously. The direction indicator lamps and the control lamp in the switch also flash.
Turn on the alarm when, for example:
- You have reached the end of the traffic jam;
- You have been involved in a traffic accident;
- Your vehicle has stopped due to a technical problem.
Instrument cluster illumination adjustment
Turn the dimmer knob to set the desired lighting intensity in the instrument cluster.
Rear fog lights
The rear fog lights come on only when the high beam or low beam headlights are on.
Interior lighting
Depending on the position of the interior light switch, the light can be switched on continuously by the switch or when one of the doors is opened.
Ignition light
To make it easier to find the ignition switch, when you open the car door, the ignition switch light turns on.
After the door is closed, the ignition switch illumination remains on for some time.
Windscreen wiper and washer switch
To turn on the wiper, move the lever down sequentially.
To turn on the washer, press the button at the end of the lever.
The ignition key must be in position «ON».
Intermittent operation when the lever is in position «INT» with an interval of 3 to 12 s, depending on the position of the regulator in the position between «S» and «F».
Headlight washer
The headlight washer only works when the headlights are on after the washer button is pressed.
Rear window heating
Heating functions only when the ignition is on. When the heating is switched on, the control lamp in the switch lights up.
As long as the rear window is clean, do not turn on the heating. Reducing the number of operating current consumers contributes to fuel savings.
On vehicles with electrically adjustable exterior mirrors, the heating of the surface of the mirrors is switched on simultaneously with the activation of the heated rear window.