 |  |
2. Before removing the valves, prepare a storage area for the relevant parts.
3. Using a valve spring compressor, compress each spring and remove the keepers from the end of the valve. Remove the spring compressor and remove the spring retainer and spring. Using pliers, carefully remove the valve stem seal from the valve stem.
4. When the valve spring is removed and the spring cup does not come off the crackers, it is necessary to hit the spring cup with a hammer through a wooden block, which will release the crackers.
5. Remove the valve through the combustion chamber. Store each valve in a separate plastic bag along with the spring plate, spring, spring seat and crackers for later installation in their places.
6. Remove the remaining valves from the cylinder head in the same manner.
(The information was taken from a web portal: Toyotaman.ru)