Contents: Removal ↓ Installation ↓
Removal
1. Raise the rear of the car and place it on stands, block the front wheels. Remove the rear wheel.
2. Disconnect the suspension strut from the bracket.
3. Remove the middle section of the exhaust pipe.
4. Loosen the nut and remove the bolt securing the suspension arm to the bracket.
5. Unscrew the lower nut and remove the bolt securing the arm to the suspension crossmember.
6. Remove lever N₂.
7. Remove the stabilizer bushing clamps.
8. Remove the exhaust end section.
9. Remove lever N1.
Installation
1. The suspension arms are installed in the reverse order. Tighten all threaded connections to the specified torques.
2. Install the wheel.
3. Check and, if necessary, adjust the rear wheel alignment angles at a car service center.