Check the cylinder for wear or damage.
Replace the cylinder if necessary.
Caution: Replace all parts included in the repair kit used to service the brake master cylinder.
Caution! When installing, lubricate the rubber parts with clean brake fluid to facilitate assembly. Do not use industrial compressed air to dry and clean the brake mechanism parts. This may damage the rubber parts. If any part of the hydraulic system is removed or disconnected, bleed the brake system completely.
Attention! The tightening torque values are set for dry, non-lubricated fastening.
Caution: Perform all repair work on a clean workbench, free of mineral oil stains.
[The original is published on the website ToyotaMAN.ru]
Install all components in the reverse order of removal.