Pic. 6.8. Brake Pedal Height Adjustment Diagram: 1 - stock; 2 - stop signal switch; 3 - pedal height
Check and adjust brake pedal height (pic. 6.8).
Pedal height from floor: 144.1-154.1 mm
Disconnect the brake light switch connector.
Loosen the locknut and remove the brake light switch.
Loosen stem locknut.
Adjust the pedal height by turning the stem.
Tighten the stem locknut.
Tightening torque: 26 Nm.
Install the brake light switch and rotate it until it makes light contact with the pedal travel stop.
Loosen the brake light switch one turn.
Pic. 6.9. Distance between brake light switch and pedal limiter
Check Distance «A» between brake light switch and pedal limiter (pic. 6.9).
Distance: 5–10 mm.
Tighten the brake light switch locknut.
Connect the brake light switch connector.
Make sure the brake lights come on when the brake pedal is depressed and go out when the brake pedal is released.
After adjusting the pedal height, check its free play.
Note. If the distance «A» between the brake light switch and the brake pedal limiter has been adjusted correctly, the pedal free play will be within specifications.