Check that the air intake grilles in front of the front glass are not clogged (like leaves or snow).
On rainy days, do not blow cold air into the windshield. The front glass may fog up due to the difference in air temperature between the outside and inside of the front glass.
Keep the area under the front seats free of clutter by allowing air to circulate throughout the vehicle.
On cold days, set the fan speed to high for one minute to clear snow or moisture from the intake piping. This can reduce the amount of fogging on the windows.
Close all windows when driving on dusty roads. If the dust raised by the vehicle still enters the vehicle after closing all the windows, it is recommended to set the air intake control to FRESH and the fan speed control to any position other than «OFF».
Pic. 1.116. Scheme for adjusting air flow in the car
If you are following another vehicle on a dusty road or driving in windy and dusty conditions, it is recommended that you temporarily set the air inlet control to the RECIRCULATION position, which will close the outside air duct and prevent outside air and dust from entering the vehicle interior.
Heating
For best results, set the controls as described below.
For automatic mode - press the button «AUTO».
Temperature - up to the desired temperature.
Air inlet - to position FRESH (outside air).
Air conditioning - to the OFF position.
For manual mode: fan speed - to the position of the desired fan speed.
Temperature - to the HEAT position.
Air inlet - to position FRESH (outside air).
Airflow - to the FLOOR position.
Air conditioning - to the OFF position.
For quick heating, select internal air circulation for a few minutes. To prevent the windows from misting up, select the fresh air supply after the vehicle interior has warmed up.
Click the button «A/C» to reduce humidity during heating.
Select the airflow towards the floor/windshield to heat the vehicle interior while defrosting or drying the windshield.
Air conditioning
For best results, set the controls as described below.
For automatic mode - press the button «AUTO».
Temperature - up to the desired temperature.
Air inlet - to position FRESH (outside air).
Air conditioning - to the ON position.
For manual mode: fan speed - to the position of the desired fan speed.
Temperature - to the COLD position.
Air inlet - to position FRESH (outside air).
Airflow - to the PANEL position.
Air conditioning - to the ON position.
For fast cooling, select internal air circulation for a few minutes.
Ventilation
For best results, set the controls as described below.
For automatic mode - press the button «AUTO».
Temperature - to low temperature.
Air inlet - to position FRESH (outside air).
Air conditioning - to the OFF position.
For manual mode: fan speed - to the position of the desired fan speed.
Temperature - to the COLD position.
Air inlet - to position FRESH (outside air).
Airflow - to the PANEL position.
Air conditioning - to the OFF position.
Defogging and defrosting
Inner side of front glass
For best results, set the controls as described below.
For automatic mode: temperature - in the direction of high temperature for heating; towards low temperature for cooling
Air inlet - to position FRESH (outside air).
Airflow - to the FRONT WINDOW position.
For manual mode: fan speed - to the desired fan speed.
Temperature - in the direction of high temperature for heating; towards low temperature for cooling.
Air inlet - to position FRESH (outside air).
Airflow - to the FRONT WINDOW position.
Pressing the front window button simultaneously switches on the air conditioning in defrost mode. At this time, the button indicator turns on «A/C», regardless of whether the button is pressed «A/C» or not. This is provided for faster clearing of the front view.
To turn off the air conditioning only, press the button «A/C» again.
If the button «A/C» is not pressed, the air conditioning is turned off by pressing another airflow button.
On rainy days, do not blow cold air onto the windshield - the difference between indoor and outdoor temperatures can increase fogging.
The outer side of the front glass
For best results, set the controls as described below.
For automatic mode: temperature is in the direction of high temperature.
Air inlet - to position FRESH (outside air).
Airflow - to the FRONT WINDOW position.
For manual mode: fan speed - to the desired fan speed.
Temperature is in the direction of high temperature.
Air inlet - to position FRESH (outdoor air).
Airflow - to the FRONT STEEL position.
Pressing the front window button simultaneously switches on the air conditioning in defrost mode. At this time, the button indicator turns on «A/C», regardless of whether the button is pressed «A/C» or not. This is provided for a faster improvement in forward visibility.
To turn off the air conditioning only, press the button «A/C» again.
If the button «A/C» is not pressed, the air conditioning is turned off by pressing another airflow button.
To heat the vehicle interior while defrosting the front window, select the air flow towards the floor/front window.