Pic. 2.176. Sealing locations
Apply new sealant to the places shown in Figure 2.176.
Pic. 2.177. Bolts of fastening of a cover of a head of the block of cylinders
Install the cylinder head cover by tightening the mounting bolts with a tightening torque of 11 Nm (pic. 2.177).
Install the oil pump fitting (models without oil cooler), tightening it with a tightening torque of 30 Nm.
Pic. 2.178. Tightening the oil cooler bypass bolt: 1 - nut
Install the oil cooler by tightening the bypass bolt to 78.5 Nm and the mounting nut to 9 Nm (pic. 2.178).
Pic. 2.53. Removing the oil filter: 1 - special tool
Install oil filter (see fig. 2.53).
Wrap the spark plugs with a tightening torque of 19 Nm.
Install the PCV valve by tightening it to 19 Nm.
Screw on the oil filler cap.