Pic. 2.260. The order of loosening the bolts with an internal hexagon on each cylinder head
Using an 8mm wrench, remove the hexagon socket head bolts on each cylinder head (pic. 2.260).
Pic. 2.261. The order of unscrewing the nuts and bolts of the cylinder head
Uniformly loosen and remove two nuts and eight cylinder head mounting bolts in several passes, in the sequence shown in Figure 2.261.
Attention! Incorrect order of unscrewing the bolts can lead to deformation of the head of the block.
Remove the cylinder head from the guide pins on the cylinder block and lay it on a workbench with a piece of wood and a rag underneath.