Disconnect the front left disc brake caliper.
Remove the front disc.
Using a dial gauge, check the clearance near the center of the wheel hub.
Maximum: 0.05 mm.
If the clearance exceeds the maximum, replace the bearing.
Using a dial gauge, check for runout at the periphery of the wheel hub surface.
Maximum: 0.05 mm.
If the runout exceeds the maximum, replace the hub.
Install the front disc.
Install the front left disc brake caliper.
Install the front wheel.
Tightening torque: 103 Nm.
Remove the rear wheel.
Disconnect the rear left disc brake caliper.
Remove the rear disc.
Install a dial gauge near the center of the wheel hub and check the end play.
Maximum: 0.05 mm.
If the clearance exceeds the maximum, replace the hub.
Using a dial gauge, check for runout at the periphery of the wheel hub surface.
Maximum: 0.07 mm.
If the runout exceeds the maximum, replace the hub.
Install the rear disc.
Install the rear left disc brake caliper.
Install the rear wheel.
Tightening torque: 103 Nm.
Pic. 3.131. Front wheel bearing clearance check
Pic. 3.132. Front axle hub runout check
Pic. 3.133. Checking the clearance of the rear wheel hub bearing
Pic. 3.134. Checking the runout of the rear axle hub