Fuse location (on some models)
If the headlights or other electrical components do not work, then check the fuses. If any of them are burned out, they must be replaced.
Turn off the ignition switch and non-working components. Pull the suspect fuse straight towards you and test it.
Determine which fuse is causing the problem. The fuse box cover shows the circuit name of each fuse.
Type A fuses can be pulled out with a puller.
If you are unsure if a fuse is blown, try replacing the suspicious fuse with one you know is good.
If the fuse is blown, install a new one in the clip.
Install a fuse only with the amperage rating indicated on the cover of the fuse box.
If a spare fuse is not available, the fuse can be pulled out in an emergency "MIRROR-HEATER", "DOME" or "A/C", which is not essential for normal driving, and use it if it has the same amperage rating.
If it is not possible to use a fuse with the same amperage rating, use one that has a lower rating, but as close as possible to the rating. If the amperage is lower than specified, the fuse may blow again, but this does not indicate any problem. Be sure to try to get the correct fuse as soon as possible and put the replacement fuse back in the original clip.
If the new fuse blows immediately, there is a problem in the electrical system. Contact the experts as soon as possible.
Attention! Never use a fuse with a higher amperage rating or any other object in place of a fuse. This can cause serious damage and lead to a fire.