Remove the front wheels.
Remove the front left drive shaft assembly.
Remove the front right drive shaft assembly.
Pic. 3.55. Removal of an epiploon of a forward cover of a case of the main transfer
Using the special tool 09308-00010, remove the oil seal of the front cover of the main gear housing (pic. 3.55).
Pic. 3.56. Removal of an epiploon of a case of a transmission
Using the special tool 09308-00010, remove the gearbox housing oil seal (pic. 3.56).
Lubricate the sealing lip of the new oil seal with MP grease.
Pic. 3.57. Pressing in the oil seal of the front cover of the main gear housing
Using special tool 09608-10010 and a hammer, press in a new oil seal (pic. 3.57).
Pressing depth: (0±0,5) mm.
Attention! Be careful not to damage the seal lip.
Lubricate the sealing lip of the new oil seal with MP grease.
Pic. 3.58. Pressing in the oil seal of the final drive housing
Using special tool 09608-32010 and a hammer, install a new oil seal (pic. 3.58).
Reassemble and install the remaining elements in the reverse order of removal.
Add oil to the gearbox.
- Oil grade: GL-4 API or GL-5.
- Viscosity: SAE 75W-90.
- Refueling volume: 2.5 l.
- Tightening torque: 49 Nm.
Check the oil level in the gearbox.
Check and adjust the angles of the front wheels.
Check ABS sensor speed signal.