Power steering pump on models since 1992 with four-cylinder engines
1 - drive belt; 2 - return hose; 3 - pressure hose; 4 – a bolt of fastening of a pressure hose; 5 - gasket; 6 - pump; 7 - vacuum hoses; 8 - protection of the right front fender
Power steering pump on 1993 and 1994 models with four-cylinder engines
1 - protection of the right front wing; 2 - drive belt; 3 - return hose; 4 – the right tip of steering draft; 5 – a bolt of fastening of a pressure hose; 6 - gaskets; 7 - pressure hose; 8 – vacuum hoses; 9 - pump
Power steering pump on models since 1995 with four-cylinder engines
1 - protection of the right front wing; 2 - pump; 3 - return hose; 4 - pressure hose; 5 – a bolt of fastening of a pressure hose; 6 - gasket; 7 - engine 5S-FE; 8 - drive belt; 9 - vacuum hoses
Power steering pump on 1992 models with a six-cylinder engine
1 - protection of the right front wing; 2 - drive belt; 3 - return hose; 4 - pump
Power steering pump on 1993 and 1994 models with a six-cylinder engine
1 - drive belt; 2 - return hose; 3 - gasket; 4 – a tip of the right steering draft; 5 - protection of the right front wing
Power steering pump on models since 1995 with six-cylinder engines
1 - protection of the right front wing; 2 - return hose; 3 - gasket; 4 – a bolt of fastening of a pressure hose; 5 - pressure hose; 6 - drive belt; 7 - engine 1MZ-FE
Removing
1. Remove the ground wire from the battery.
2. Remove the cap from the power steering hydraulic fill reservoir and use a syringe to draw fluid out of the reservoir.
3. Raise the front of the car and secure it on stands. Remove the right front wheel.
4. Remove the protection of the right front fender.
5. Loosen the clamp and remove the return hose from the pump.
6. Unscrew the special connecting bolt and remove the pressure hose from the pump.
7. Loosen the pump adjusting and pivot bolts and remove the drive belt.
8. Unscrew the mounting bolts and remove the pump.
Installation
9. Installation is made in sequence, return to removal. Adjust the drive belt tension.