Warning! If your radio has an anti-theft code, check that you have the connection codes before disconnecting the battery.
Caution! On models from 1993 onwards, the airbag system is disabled if the battery is disconnected for an extended period of time. If the airbag warning light comes on and remains on after the battery is reconnected, contact a specialist workshop to restore the system to working order.
Starter
1 – starter housing and clutch; 2 – gear; 3 – retaining ring; 4 – bearing; 5 – spring; 6 – spring holder; 7 – starter housing; 8 – overrunning clutch; 9 – spring; 10 – shaft; 11 – traction relay; 12 – spring; 13 – bearing; 14 – gear; 15 – steel ball; 16 – front bearing; 17 – rotor; 18 – rear bearing; 19 – sealing ring; 20 – stator; 21 – sealing ring; 22 – brush holder; 23 – back cover; 24 – dust cover; 25 – sealing ring.
Location of the starter relay in the relay box
1. Remove the ground cable from the battery.
2. Remove the battery from the engine compartment.
3. Disconnect and remove the cruise control actuator from the engine compartment.
4. Disconnect the electrical wires from the starter and traction relay.
 |  |
5. Unscrew the starter mounting bolts.
The information was taken from a web portal: toyotaman
6. Carefully remove the starter from the engine.
7. Installation is carried out in the reverse order of removal.