Attention! On vehicles equipped with engines with a catalytic converter, it is necessary to ensure that the oil level on the dipstick is not above the maximum mark. If too much oil has been poured into a car with a catalytic converter, the excess must be removed from the crankcase by draining or suction (special vacuum pump), otherwise unburnt oil will enter the exhaust system and may destroy the catalytic converter.
Filling volume:
- dry - 5.0 l;
- with an oil filter - 3.8 l;
- without oil filter - 3.0 l.
Pic. 2.17. Scheme of the lubrication system: 1 - oil return channel; 2 - chain tensioner; 3 - control valve of the variable valve timing system; 4 - water-cooled oil cooler