Pic. 3.24. Grease Application Points on the Piston Body
Lubricate piston parts with lithium grease (places for applying lubricant are shown by arrows in Figure 3.24).
Install the piston with the spring into the cylinder.
Attention! Be careful not to damage the inside of the cylinder body.
Install the thrust plate on the pusher.
Install the tappet into the cylinder body.
Pic. 3.23. Removing the retaining ring
While pushing the piston rod, install the circlip using circlip pliers (see fig. 3.23).
Install the cover on the cylinder body.
Install the pusher locknut.
Temporarily install the pusher yoke with locknut on the pusher.
Install the inlet fitting and a new o-ring.
Pic. 3.25. Slotted Spring Pin Installation Diagram
Using a beard with a thin sting (5 mm) and hammer, install the splined spring pin (pic. 3.25).