Pic. 3.19. Bolts of fastening of the main brake cylinder
Remove the main brake cylinder by unscrewing the mounting bolts shown by the arrows in Figure 3.19.
Pic. 3.20. Bolts of fastening of the amplifier of brakes
Remove the brake booster by unscrewing the mounting bolts shown by the arrows in Figure 3.20.
After loosening the clamp, disconnect the clutch master cylinder reservoir tube from the clutch master cylinder. Drain the liquid into a plastic container.
Pic. 3.21. Disconnecting the flexible hose from the clutch master cylinder
Using special tool 09023-00100 and a special wrench, disconnect the flexible hose from the clutch master cylinder (pic. 3.21)
With the clip and pin removed, remove the clutch master cylinder pusher yoke with pin.
Remove the 2 nuts and remove the clutch master cylinder.