2. Raise the front of the vehicle and place it on stands.
Note: Be careful not to splash liquid out of the reservoir.
3. With the engine off, turn the steering wheel from lock to lock several times.
4. Lower the car.
5. Start the engine and set to 1000 rpm. Turn the steering wheel from lock to lock while holding it in the extreme position for 2-3 seconds. Repeat this procedure three or four times.
6. Turn off the engine.
7. Check for foaming or emulsification of the liquid. If foaming or emulsification is present, check for leaks in the system.
8. Check fluid level.